Quick Answer: Can I Plug An Ethernet Cable Into A LAN Port?

Do I plug Ethernet into WAN or LAN?

This port is intended to connect your router to the modem, and the outside world from there.

The LAN ports are designed for connecting to local devices.

Plug one Ethernet cable into your modem and the other end into your router’s WAN port..

Should I use WAN or LAN port?

Use the LAN ports on your wireless router to connect devices on your home network, such as computers or printers. Connect the WAN port to your modem or another device hooked up to the public internet.

Is Wan faster than LAN?

WAN. LAN, which stands for local area network, and WAN, which stands for wide area network, are two types of networks that allow for interconnectivity between computers. LANs are typically faster and more secure than WANs, but WANs enable more widespread connectivity. …

Are WAN and LAN cables the same?

WAN stands for Wide Area Network and this is the network that connects your router to your service provider. The WAN port usually connects to a DSL modem, cable modem or fibre media converter. LAN stands for Local Area Network and this is the network that connects the devices within your home/business to the router.

What is the difference between WAN and LAN?

A LAN (local area network) is a group of computers and network devices connected together, usually within the same building. … A WAN (wide area network), in comparison to a MAN, is not restricted to a geographical location, although it might be confined within the bounds of a state or country.

What is the disadvantage of WAN?

The three most critical downsides are high setup costs, security concerns, and maintenance issues. High setup costs — WANs are complicated and complex, so they are rather expensive to set up. Obviously, the bigger the WAN, the costlier it is to set up.

What is a LAN port on router?

In short, LAN ports on a router allow Ethernet-ready devices to connect to one another and share data. In order for them to also access the internet, the router needs to have a Wide Area Network (WAN) port. On many routers, this port may also be labeled the internet port.

Which port do you plug an Ethernet cable into?

The Ethernet cable from the broadband modem should go to the router’s Internet or WAN port. The Ethernet cables from your Ethernet-based devices should go to any of the numbered ports at the back of the Linksys router (1, 2, 3 or 4).

Where do you connect Ethernet cable to router?

Connect one end of one Ethernet cable into the back of the modem, then connect the other end into the Wide Area Network (WAN) port on the router. Connect the router power cord into an electrical outlet, then connect the other end to the router.

Can I use the WAN port for LAN?

Sometimes, when the WAN-port is not used (like if you have a second router and is instead using the LAN-port), it would be nice to use it as a LAN-port instead. … If more LAN-ports is what you need, you should instead get a switch. A switch will give you extra LAN-ports that you can use for your devices.

Are all LAN ports the same?

No, all the four LAN ports are the same (as per the pic in comments). You can connect to any port and speed or anything else will not be affected.

Is a LAN port the same as an Ethernet port?

LAN stands for Local Area Network. … A LAN port is also known as an Ethernet port. Both terms refer to exactly the same socket on computers, servers, modems, Wi-Fi routers, switches or other network devices.

How do I connect to Ethernet?

How do I connect my computer to my modem via an Ethernet cable?Connect the Ethernet cable to a yellow LAN port on your modem.Connect the other end of the Ethernet cable to an Ethernet port on your computer or laptop.Make sure that the Ethernet light is green and flashing next to the port you have used on your modem.More items…

Can I connect WAN to LAN?

Connect the two routers. Plug one end of the Ethernet cable into any LAN port of the primary router, then plug the other end of the cable into the LAN port on the back of the second router. If you are creating a LAN-to-WAN network, plug the other end into the WAN (or “Internet”) port on the secondary router.

Does Ethernet plug into LAN?

Their purpose is to connect wired network hardware in an Ethernet LAN, metropolitan area network (MAN), or wide area network (WAN). Ethernet is pronounced with a long “e” as in the word eat. Ethernet ports go by other names also, such as LAN ports, Ethernet connections, Ethernet jacks, LAN sockets, and network ports.

Can a phone line be plugged into an Ethernet port?

2 Answers. You can plug standard “square” RJ14 cables into a RJ45 jack, as long as the port is wired to your phone line. … Plugging a phone into a jack wired for ethernet probably won’t be a problem.

Should I plug Ethernet into modem or router?

You can connect a single device by Ethernet directly to the modem to access the Internet. That single device typically is a PC or a router. If you have a separate modem, then the router will have one dedicated Ethernet port, often in a different colour, to connect to the modem.

Is Ethernet better than LAN?

The major difference between ethernet and LAN is that the working of ethernet is not centralized while LAN functions in a centralized manner….Comparison Chart.Basis for comparisonEthernetLANTransmission mediaOnly wiredWired as well as wireless.ReliabilityLowHigh4 more rows•Jan 15, 2019