Question: When Can You Walk On Thompson Water Seal?

How long does it take for Thompson Water Seal to dry?

within 2 hoursQ: How long does Thompson’s® WaterSeal® Waterproofing Stain take to dry.

Drying time will vary depending on temperature and humidity.

Under normal conditions, the product should dry to the touch within 2 hours..

How long do you have to wait to seal pressure treated wood?

It is important to wait for the wood to dry before sealing a new deck, but at the same time, you don’t want to wait too long. Drying can take several months. We recommend beginning to test the wood around 90 days after your project is completed, but this is just a general suggestion.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What is the longest lasting deck sealer?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

What happens if you paint treated wood too soon?

But, the catch is that you should not paint treated wood too soon after it has been purchased. … If you paint treated wood while it is still wet, your coat of primer or paint will most likely be rejected by the water-borne chemicals slowly bleeding their way out of the lumber.

Can pressure treated wood get rained on?

Because rain adds moisture to wood, it can interfere with absorption. … You shouldn’t stain any type of wet wood. However, if you’ve allowed the treated lumber to adequately dehydrate prior to being rained upon, you can begin the staining process 24 hours after the rain has ceased.

Is it better to stain or paint pressure treated wood?

Because of the pressure-treating process, exterior paint is less likely to adhere to pressure treated wood and more likely to peel. Some experts advise staining or sealing over painting, but paint can be successfully applied by following extra precautions.

Can Thompson Water Seal be sprayed on?

Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. … Once you are done with the product, it is recommended that you run mineral spirits through the sprayer and then water to clean it.

How long should I wait to seal my new deck?

DO wait 30 days before sealing a new deck. If you’ve just put in a new deck, you’re no doubt itching to finish the job by sealing it. But preservatives in the wood often require about 30 days’ dwell time before the deck can soak up the sealant. After a 30-day period, pour some water on your deck.

How many coats of Thompson Water Seal do I need?

2 coatsApply 2 coats using brush,roller or sprayer. note: Use at full strength.do not dilute. The second coat should be applied when the first coat has soaked in the surface. For best results do not leave the first coat to dry for more than 1 hour before applying the second coat.

What if it rains after applying Thompson’s Water Seal?

Similarly, it is asked, what happens if it rains after applying Thompson’s Water Seal? Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

How often should you seal your deck?

For most decks, sealing once each year is a good rule of thumb. Depending on the condition of your deck this can be adjusted, but keep in mind that you should never go beyond three years maximum before re-sealing and staining.